Wavlink is leading the race when it comes to offering lag-free internet to people throughout their homes. However, sometimes users can’t log in to their extenders for making changes to the settings of their devices. If you are also facing issues while accessing the Wavlink WiFi extender login page, then this troubleshooting guide is all you need to check.
Here, in this piece of writing, we have jotted down various steps for fixing Wavlink login issues. So, without any further delay, get access to the settings of your range extender by walking through the steps below.
Reasons Behind Facing Wavlink Login Issues
Wavlink users may find themselves trapped in the login issues of their extenders due to various reasons. A few of them are as follows:
-
Poor Connectivity
-
Wrong Login Details
-
Bad Placement of Extender
-
Outdated Web Browser
-
Incorrect Web Address
-
Issues from ISP
-
Partial Extender Setup
As you are now through with the reasons dragging you to the login issues of your Wavlink, let’s now make you aware of their fixes. Here we go.
Troubleshoot Wavlink Extender Login Issues
Check Connections
The very first hack you can try to fix the login issues with your Wavlink extender is to check the connectivity between all the devices.
Those who have used an Ethernet cable to connect their devices need to ensure that the cable is correctly installed and is not flipped off from any point. You can also give your extender a fresh start by rebooting it. This will get you rid of technical glitches (if any) that might be coming within your way to access the Wavlink extender login page.
Verify Login Details
Another reason behind getting login issues with a Wavlink extender could be the use of the wrong username and password. So, check the same and ensure that you have entered the right login details.
There should not be a single typing error in the username and Wavlink login password you have used to access the dashboard of your device. Moreover, know that the login details of Wavlink extenders are case-sensitive. So, while inputting the details into their respective fields, keep in mind to turn the Caps Lock key off.
-
Relocate Your Wavlink Extender
If your host router is placed too far from the Wavlink extender then also you will get no results when it comes to logging in to the device.
So, relocate your extender within the range of your router and far from the things causing WiFi interference. For instance, you can keep the Wavlink extender away from baby monitors, cellular phones, aluminum studs, metal appliances, Bluetooth speakers, etc.
-
Update Your Internet Browser
Another Wavlink troubleshooting hack that you can try to fix login issues with your device is to update the web browser being used for accessing the Wavlink default web address.
Also, keep in mind to wipe off cache and cookies from the web browser to avoid getting further issues.
-
Inspect Web Address
You may fall victim to the issue at hand due to the use of the wrong web address. Check if you have entered the login address of your Wavlink into the address field only.
Besides, make sure there are no typing errors in the address used for accessing the setup wizard of the device.
-
Contact Your ISP
Check with your Internet Service Provider and confirm that the issue is not from his end. Perhaps, there is an internet outage in your area and that is why you can’t access the login page of your Wavlink.
-
Reset and Reconfigure Your Extender
Lastly, you may not be able to get success with the login process of the Wavlink extender if the device is not configured rightly. In that case, you need to take your Wavlink back to default settings and then do the Wavlink setup again from scratch.
This is all about fixing Wavlink login issues. Let’s know your feedback about the write-up.