Comfast WiFi Extender Not Giving Full Speed – How to Fix?


People install Comfast range extenders in their homes so that they can enjoy accessing a lag-free internet connection. However, doing so seems to go futile when the Comfast extender fails to deliver its full speed. Are you going nuts because of the same problem? No! Don’t think of discarding your Comfast range extender. Here, we have jotted down some effective troubleshooting hacks that will help you extract the maximum performance from your Comfast wireless device. So, read on.

Fixed: Comfast Extender Not Giving Full Speed

  • Place the Comfast Extender Properly

Once the Comfast WiFi extender setup process gets completed, users are suggested to change the location of their extender. It is done so that every dead zone in the house gets filled with a super-fast internet connection. However, the location needs to be chosen wisely. So, let’s check whether the location of your range extender is appropriate or not.

Have you placed it near any device emitting electromagnetic radiation? Is it sharing a room with televisions, microwave ovens, refrigerators, Bluetooth speakers, baby monitors, washing machines, or similar gadgets? If yes, then, unluckily, your extender isn’t placed well. But, you can rectify the mistake of the wrong placement of the extender by relocating it. Additionally, never place the extender close to reflexive surfaces, metal objects, and water objects.

  • Use a Hardwired Connection

When it comes to networking, the speeds offered by a wired source are a number of times better than a wireless source. So, why have you connected your devices wirelessly? For convenience? Well, a wireless connection between your Comfast extender and the host router is most likely to get affected by external noise. Thus, consider connecting your devices using an Ethernet cable.

In case you are already using an Ethernet cable, then see to it whether the one you have employed for connecting your devices is damage-free or not. Thus, consider swapping it with a brand new cable. And, do not forget the key rule of a finger-tight connection.

  • Update the Firmware

Firmware updates are for the better of your Comfast extender. It means every firmware update introduces new features to your Comfast device which then results in a smooth performance. So, without waiting any more, consider updating the firmware of your Comfast extender after doing Comfast login. Here are the steps to update your Comfast device:

  1. Power up your Comfast and check its strong connectivity with the main router.

  2. Thereafter, open a web browser that you mostly use and download the Comfast firmware file.

  3. Open a new tab and access the default IP of the Comfast extender.

  4. Log in to the Comfast device using the password assigned to it while installation.

  5. Locate Management > Firmware Update.

  6. Upload the firmware file and wait patiently.

In this manner, you can update the Comfast device in a hassle-free way. Check if your extender has started delivering full speed.

  • Avoid Overheating

Although heating is a normal phenomenon for any networking device, however, if the device overheats then it also affects the performance. Chances are that your Comfast device is overheating which is preventing it from working up to its full extent. Therefore, you need to prevent it.

To avoid overheating of your range extender, you can consider plugging it into a cool and well-ventilated room. However, do not expose your extender to a direct source of heat. Consider keeping your extender off when not needed. You are also free to make use of a USB fan to dissipate the excessive heat.

  • Do Not Forget to Reboot

If you have a lot of networking devices, then you might be aware of the importance of rebooting. The process of rebooting helps any device to get free from technical glitches. So, if you want your Comfast device to stay away from these glitches, rebooting will never disappoint you.

To give rebooting a shot, you have to switch off the range extender by pushing the Power button, waiting for some time, and pushing the Power button on the extender (in order to switch it on). Once you make this your habit, you will notice a growth in the performance of your Comfast device.

The Concluding Thought

With that, we are wrapping up our guide to fix the Comfast extender not giving full speed issue. Hopefully, you will be able to fix the extender’s slow speed with the help of the troubleshooting hacks discussed above. On the off chance, that you are still facing the issue, it is recommended that you reset your Comfast device. To know how to reset Comfast WiFi extender, consider taking the help of the device’s user manual. It consists of every little detail of your Comfast device. How was your experience of troubleshooting the problem? Share your thoughts in the comment section.

Share post:



More like this

How to Fix Slow Download Speed with Rockspace Extender?

If you are facing the slow downloading speed of...

Extender Connection Is Weak With Router

Are you facing issues with the extender connection? Because...

Key Benefits of a Digital MSME Loan for Business Owners

MSMEs contribute 29% of India's GDP. MSME's need financial...

Wavlink AERIAL X Not Showing Internet Access. What to Do?

Is your Wavlink AERIAL X extender not giving out...
error: Content is protected !!